How To Set The Time On A Casio Watch

Download Commodity

Download Article

This wikiHow teaches you lot how to set a Infant Grand wristwatch's fourth dimension. The time on both the digital and the analog-digital versions of the Infant G lookout man tin can be ready using the aforementioned procedure, though your watch'southward extra features volition vary depending on its model.

Steps

1. 1

   Familiarize yourself with your lookout's buttons. There are iv principal buttons on your spotter. They may be labeled differently than below, but they all serve the same functions once you place your watch in edit style:

   • Arrange - Upper-left corner of the watch. Used to identify your watch in edit way.
   • Reverse - Upper-correct corner of the watch. Used to move dorsum i value (e.g., a time zone, an hour, etc.).
   • Forward - Lower-right corner of the scout. Used to motion forward one value (e.k., a time zone, an hour, etc.).
   • Mode - Lower-left corner of the lookout man. Used to bicycle through options on your watch.

2. 2

   Printing and concord the Adjust push button for three seconds. This is the button in the upper-left corner of the lookout man's confront. Afterwards three seconds, you should run into i of the items on the picket'southward face begin flashing.

   Advert

3. iii

   Press repeatedly the Mode button until the Seconds value begins flashing. The "Mode" push button is in the bottom-left side of the watch face. In one case the number that represents the number of seconds begins flashing, you tin can proceed.

4. iv

   Reset the seconds to the current time. Printing the Contrary or Forrad push button in the upper- or lower-right corner of the scout until the seconds match the current time (e.g., 30 seconds).

5. 5

   Select the Minutes value. Press the Mode push again to select the number that represents minutes.

6. half-dozen

   Modify the Minutes value to a minute before the current fourth dimension. You lot can do this by pressing the Opposite or Forward button.

   • Setting the minutes to a minute prior to the current time will allow the minutes to automatically synchronize when the seconds reach 60 again.

7. vii

   Select the "Hour" value. Press the "Way" button again until the current hour is selected.

8. eight

   Change the "60 minutes" value to the current hour. Press the "Reverse" or "Forward" push to cycle to the electric current hour (e.g., 6).

   • If you're using 12-hour fourth dimension on your watch, make certain that the time of day (represented by "AM" and "PM") is right. If it isn't, you lot'll have to wheel through 12 times to go to the correct fourth dimension.

9. ix

   Adjust any flashing options. You can press the Mode push button to cycle through other options that you picket has to offer, and use the Opposite/Forward buttons to adjust them as needed:

   • Time zone - This will usually appear at the top of the sentry'south face. Go along in mind that the time zone volition affect the current hour.
   • DST - You lot can turn this on or off on supported watches. Doing so volition permit your watch's time to reset based on daylight savings time.
   • 12H or 24H - This setting will allow you to choose between 12-hour time (east.one thousand., AM and PM) and 24-hour fourth dimension (e.thousand., 06:00 for half dozen AM, 18:00 for half-dozen PM).
   • Light - On Babe G watches that have lights built in, you may exist able to gear up a number of seconds for which the light displays.
   • Engagement - You can usually adjust the month and mean solar day on supported watches.

10. 10

    Press the Adjust push button. This volition set your Infant G lookout'due south time to lucifer your selected time.

    • On some watch models especially analog-digital ones you may need to agree downward Adjust for a couple of seconds before the fourth dimension will ready.
    • Analog-digital models' easily will automatically adjust to match the digital time.

Ad

Add together New Question

• Question

  How do I illuminate the 3 smaller circular windows? The windows are so dark I cannot read the display.

  

  Yous don't, sadly. The only thing you can do if y'all've had the spotter for some time is go new batteries put in. My three windows faded to nothing then I had new batteries put in, I can now see the numbers over again and they are not overly bright, simply they are now visible.

• Question

  How do I stop the hourly beeping?

  

  You need to plough the 'Sig' mode off. Press the style button (located on the bottom left) several times until you take accomplish the selection to view the alarms. Printing on the 'Search' or bottom left button to get through all the alarms until y'all are at 'SIG'. Stop there and press on the 'Adjust' button (top left) to toggle the hourly beeping setting on or off.

• Question

  How exercise I set the alarm on a Baby Grand-shock?

  

  Go to the alarms and press on the adjust button once. However, holding on to information technology volition adjust the alarm fourth dimension, and it'll wink after a beep.

• Question

  How do I adjust for daylight savings time on my Baby G Watch?

  

  Only accommodate the hour in whichever management you lot need to. The minutes will be the same.

• Question

  How can I change time when I hold downwards the top left adjust push and it does not work?

  

  You might have to go to the principal screen where it shows the date. When I needed to set my clock an hour back at the end of daylight savings, I had to become to the date screen and hit adjust there, so continue to adjust everything as necessary.

• Question

  Where can I purchase a Baby G picket?

  

  Y'all can buy them on Amazon, eBay, etc. You can also get them at your local spotter shop, although availability may exist limited depending on where you live.

• Question

  How tin can I adjust the analog time to match the digital time on my watch?

  

  You will have to accommodate both analog and digital times separately to match each other (I personally learnt that the hard way).

• Question

  How do I switch my Baby Grand from armed forces time?

  

  Simply press the bottom right push (referred to in this article equally "Forward"). Pressing this button toggles the time betwixt standard and military.

• Question

  How do I fix the mean solar day on my Baby G lookout if the date is correct?

  

  If the date, time and fourth dimension zone are correct, the day volition be right.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

• Most Casio Baby G watches are more than or less the same when it comes to setting the time, so these instructions should piece of work for most whatsoever style.

• Depending on the model of your watch, Casio may have the pedagogy manual available online. Use the 4-digit number on the back casing of the watch, or the model number, to search for your picket's online documentation.

Advertisement

• Some analog-digital Baby G watches have hands that may somewhen stop moving in sync with the digital time. If this happens to your watch, yous should take the spotter into a repair service or department.

Advertizing

About This Commodity

Article Summary X

To set the time on a Baby Yard watch, press and hold the top-left "accommodate" button for a few seconds while you're on the main time screen. Press the bottom-left "mode" button to switch between seconds, minutes, and hours, using the top and lesser buttons on the right to adjust the time. Printing the mode push button over again to modify the date, then press the meridian-left "suit" button once more to lock in your fourth dimension. Keep reading to learn how to change your time zone or to switch between a 12 and 24-hr display.

Did this summary help you lot?

Cheers to all authors for creating a folio that has been read 1,338,544 times.

Did this article help you?

Source: https://www.wikihow.com/Set-the-Time-on-a-Baby-G-Watch

Share this post